5footwayinn is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Mks Gen V1.4

After evaluating and analyzing in detail more than 7,880 customer satisfaction about Best Mks Gen V1.4, we have come up with the top 10 products you may be interested in Mks Gen V1.4. We have ranked the best brands from our Experts backed with Artificial Intelligent and Big Data.

The Best Mks Gen V1.4 of June 2021 – Reviews and Comparison

Rank No. #1
KINGPRINT 3D Printer MKS Gen V1.4 Controller Board Mega 2560 R3 Motherboard RepRap Ramps1.4 Compatible with USB
  • Mega 2560 and ramps1.4 set on a board, to solve complicated Ramps1.4 combination of interfaces, the problem of failure prone.
  • Replace the motor drive, drive and support A4988 DRV8825 TMC2208 TMC2130 drive.
  • The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.
  • Using high-quality MOSFET, and better heat dissipation.
  • Using a dedicated power chip, support 12V-24V power input, the voltage converter chip to solve the heat problem Ramps.

Rank No. #2
KINGPRINT MKS Gen V1.4 Controller Board+5PCS DRV8825 Stepper Motor Mega 2560 Motherboard RepRap Ramps1.4 Compatible +USB Cable for 3D Printer
  • The firmware can use open source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
  • Reserved for motor pulse and direction output ports for easy plug-in high-current To add a large current (eg 2A, 5A) motor drive circuit.
  • Reserved Ramps1.4 on Servos, AUX-1, AUX-2 interface that provides three 5V output, three 12V outputs.
  • The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.
  • Can accept 24V input power under the same system can be hot-bed current is reduced to 1/4, an effective solution to the hot bed MOS pipe heat problems.
Rank No. #3
Gimax TEVO Tarantula Little Monster Tornado Motherboard Makerbase MKS GEN_L V1.0 with Four DRV A4988 Driver for 3D Printer - (Size: Tornado)
  • Size: Tornado
  • Item type: Motherboard
  • Model number: MKS GEN_L V1.0
  • Color: Same as the picture
  • Material: Same as the picture
Rank No. #4
MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS
  • ฅฅ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ฅฅ Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • ฅฅ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS
  • ฅฅ TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • ฅฅ Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
Rank No. #5
MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories
  • ❤ 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
  • ❤ Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t.
  • ❤ Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
  • ❤ Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4.
  • ❤ Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
Rank No. #6
Oumij MKS GEN L V1.0 Controller Board Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like
  • Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t
  • Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
  • Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to
  • Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
Rank No. #7
Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D
  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage.
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines.
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable.
Rank No. #8
3D Printer MKS Gen-L V1.0 Controller Board, MKS Integrated Mainboard Motherboard Compatible with Ramps1.4, Supports TMC2100 A4988 8825 Driver, LCD2004 LCD12864 TFT28 TFT32
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
  • Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage. Use high-quality MOSFET, better cooling effect and more stable.
  • Use CH340 serial port chip, more easily install the drive than 16U2. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
  • Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
  • Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
Rank No. #9
FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ramps1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Board-5Pcs
  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4.
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R; SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5.
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory.
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions.
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4.
Rank No. #10
CHUNSHENN 3D Printer Mainboard, MKS Gen L V1.0 Controller Compatible 3D Printer Board Improved Version with LCD2004/LCD12864 Support A4988/8825/TMC2208/TMC2100 Dri
  • Use a dedicated power chip to support V-24 V.
  • Uses the same quality configuration as Ramps 1.4 with high quality 4-layer PCB and Marlin firmware.
  • Accepts 24V input and reduces the heating bed current to 1/4, effectively solving the thermal problem.
  • 2560 and Ramps1.4 integrated on a single PCB for easier routing and stability.
  • We always attach great importance to our customers. Please feel free to contact us If you find any defects on the product.

 

At the point when you’re preparing to purchase Mks Gen V1.4, you have a ton of alternatives. There might be many items to look over, many them with client surveys that make them sound similarly incredible. It tends to be befuddling and tedious to slice through the information to track down the best item for you.

That is the place where we come in.

Our analysts and topic specialists assess the handfuls (or many) accessible items in every classification, and from them, select the waitlist of the most encouraging and smash hit items — the Mks Gen V1.4 in every classification that truly matter.

At the point when we choose you, the shopper, would profit by extra item knowledge, we purchase these items, very much like you would, and subject them to free assessment and tests.

As a rule, we construct our own test hardware to assess items and test them against one another. Why? Since solid testing requires repeatable tests, and simply giving items to individuals to evaluate isn’t sufficient. While we test large numbers of the items we audit, for some item classes we exclusively use exploration and customer input to make the data in our survey.

Please take a careful research before purchasing Mks Gen V1.4

  • Brands of Mks Gen V1.4
  • Mks Gen V1.4 Value
  • Quality and Durability or Easy to Use
  • Great Features & Specifications
  • Positive and Negative Customer Reviews & Ratings

Expert Advice

How would we realize what to search for in Mks Gen V1.4? We talk with industry specialists, project workers, and other super-clients before our survey cycle starts.

Our master consultants and specialists in home incorporate doctors, who give direction on testing wellbeing related items, PhDs with foundations in sustenance and other strength territories, building project workers who use power instruments the entire work lives, and expert cooks who understand what works and what doesn’t in kitchen apparatuses.

At last, we consider the assessments of purchasers like you, who have effectively put their cash and time in utilizing the items. We study perusers consistently to look for their sentiments on items, and we likewise pore over the item assessments left on the web, to foster a reasonable image of the qualities and shortcoming that an item may display over the long run. That is on the grounds that our lab testing can assess the presentation of Mks Gen V1.4, however just long haul true use will turn up strength and other plan imperfections.

5footwayinn.com | Made with LOVE in the USA. | Relinklabs.com IS A PARTICIPANT IN THE AMAZON SERVICES LLC ASSOCIATES PROGRAM, AN AFFILIATE ADVERTISING PROGRAM DESIGNED TO PROVIDE A MEANS FOR SITES TO EARN ADVERTISING FEES BY ADVERTISING AND LINKING TO AMAZON.COM. AMAZON, THE AMAZON LOGO, AMAZONSUPPLY, AND THE AMAZONSUPPLY LOGO ARE TRADEMARKS OF AMAZON.COM, INC. OR ITS AFFILIATES. AS AN AMAZON ASSOCIATE WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES. Check our Sitemap here https://5footwayinn.com/sitemap_index.xml. Learn more About us